How to choose magnetic separator correctly shared by magnetic separator manufacturers-Guangzhou Yucep excellent magnetic power Co., Ltd

Home

How to choose magnetic separator correctly shared by magnetic separator manufacturers

Jun 29,2021

The iron remover is a kind of safety equipment, which is used to prevent the accidental iron from entering the working machinery (especially the crusher) with the treated materials or ores.

The iron remover is a kind of safety equipment, which is used to prevent the accidental iron from entering the working machinery (especially the crusher) with the treated materials or ores. Therefore, the iron remover can prevent accidents or forced shutdown due to the entry of iron in mechanical work. Iron remover is widely used. Next, iron remover factory will teach you how to choose iron remover.
1. The correct selection of the iron remover should take into account the iron content of the material, the iron removal requirements, the use environment and the characteristics of the iron remover itself.
2. When there is more iron in the material, the self discharging electromagnetic and permanent magnetic iron remover with continuous iron discharging capacity should be selected.
3. When there is less iron in the material, it is better to use the manual iron unloading electromagnetic permanent magnet iron remover. Properly reducing the suspension height is beneficial to iron removal.
4. When there are few iron parts in the material, GJT series metal detector should be used together with strong excitation self unloading electromagnetic iron remover to save electricity and energy and achieve good iron removal effect.
5. When the power capacity is limited, permanent magnet iron remover should be selected.
6. When the dust is serious, the iron remover with fully enclosed structure should be selected.
7. When the iron remover is installed at the head of the belt conveyor, it is advantageous to remove iron because the material has forward force and is loose, but the driving wheel at the bottom of the iron remover should be non ferromagnetic material.
8. When the iron remover is installed in the middle of the belt conveyor (i.e. cross arrangement), in order to improve the iron removal effect, WCG series non-magnetic linear roller can be added under the belt.
9. For non ferromagnetic metal materials that can not be absorbed by the iron remover, GJT series metal detector should be selected to detect and manually pick them up after alarm and shutdown.
10. The iron remover has the following characteristics: absorbing large long, easy to small short; Easily attached to the ball; apical; It is easy to be static. In the case of high demand for iron removal, the specification of iron remover should be appropriately increased or multi-stage iron removal should be adopted.
11. When using multi-stage iron removal, the suction of the latter stage should be higher than that of the former stage, otherwise, the iron removal effect of the latter stage is poor.